Technopowders

The solution to a wide range of hardfacing problems. The Technopowder products cover a range of hardnesses from 40Rc to 60Rc and even greater with the Tungsten Carbide powders.

PREMIXED CARBIDE POWDERS:

Technopowder 2030 Nickel base + crushed cast Tungsten Carbide 2000 HV +/-200 HV
Applications: Thin hardfacing
Machining: Not possible
Grinding: Possible

Technopowder 40/40 Nickel base + crushed cast Tungsten Carbide 2000 HV +/-200 HV
Applications: Hardfacing, medium thickness, causes very few deformations. Crack-free hardfacing Recommended for stainless steel
Machining: Not possible
Grinding: Possible / depending on the shape

Technopowder 4000 Nickel base + Spherotene® 3000 HV +/-500 HV Very high hardness spherical cast Tungsten Carbide
Applications: Very high performance hardfacing, low thickness
Machining: Not possible
Grinding: Possible / depending on the shape

Technopowder 4040 S Nickel base + Spherotene® 3000 HV +/-500 HV Very high hardness spherical cast Tungsten Carbide
Applications: Very high performance hardfacing, medium thicknesses on base materials susceptible to deformation, e.g. stainless steels. Crack-free hardfacing
Machining: Not possible
Grinding: Possible / depending on the shape

NICKEL-BASED HARDFACING POWDERS:

Technopowder MB 40 / TP 40 Rc Underlayer Powder
Hardness: 40 Rc
Main application: Oxidation inhibiting underlayer for Technodur® and Technosphere®

Technopowder 60 Rc / TP 60 Rc
Hardness: 60 Rc Base
Composition: Ni Cr B Si: (12 to 16% Chromium)
Main application: Finishing or sliding coat for barrel extruder and screw conveyor faces.

Web design by Chameleon Creative Communications Web Design Worksop by Chameleon